All posts by: IRO Biocide

About IRO Biocide

2.5% glutaraldehyde fixative is mainly composed of glutaraldehyde and phosphate, pH 7.2~7.4. 2.5% glutaraldehyde fixative is mainly used as a fixative for electron microscopy. The fixative is good for fixing fine structures of nuclei and cell pulp and is often used for the fixation of electron microscopy specimens. The purpose of fixation is to prevent […]

Contents Table Introduction to Bronopol Experiment Raw materials and instruments Bronopol synthesis reaction Bronopol synthetic technology Bronopol purification principle Bronopol purification process Bronopol analysis method Experimental results and discussion Conclusion 1. Product introduction Bronopol is a new type of bromine-based bactericidal preservative. In the past, it was mainly used as a cosmetic preservative. Used as […]

United States buck is likely to press copper rates lower in 2016, an expert stated Thursday, in spite of current favorable growths such as manufacturing lowerings. ” The dollar is most likely to reinforce even more which will certainly be a big down pressure to prices in 2016,” CRU expert Matthew Wonnacott told the American […]

What are the advantages of industrial fungicides? Fungicides have the same effect as preservatives. General antibacterial. It has good inhibition effect on different fungi and bacteria. Long term non-toxic, no odor, very stable. It has the emulsifying effect of not destroying the matrix; the range of application is very wide. Industrial preservatives have good antibacterial […]

What Is Isothiazolinone? Isothiazolinone is a non oxidizing fungicide. It has broad-spectrum and high-efficiency bactericidal and algae killing ability. Isothiazolinone can effectively control the growth of bacteria and algae and slime in water. It also has good clay stripping effect and certain dispersion and permeability. It can effectively remove algae propagation and slime growth. At […]

Why Does DBNPA Can Be Used As Wood Mold Inhibitor? Principle of wood mold inhibitor? 1. Inhibit the growth and reproduction of mold, reduce the growth rate of mold number. 2. Kill the individual mold and reduce the absolute number of mold in the system. The former is called antibacterial effect. It is to prevent […]

Abstract Octylisothiazolinone (OIT) is a highly effective fungicide. It is widely used in the anti-mold of leather and paint, but the anti-mold effect in wood protection is rarely reported. In this paper, OIT was used as the main fungicide to test the anti-mold and anti-blueing properties of the ethanol solution and emulsified preparation for the […]

The polyamide composite reverse osmosis membrane has the functions of low energy consumption, high water production, and anti-pollution. With this reverse osmosis membrane began to be used in commercial business. Reverse osmosis desalination technology has developed rapidly. The reverse osmosis membrane system has become a very cost-effective processing unit. Especially in water purification technology. Reverse […]

Abstract: Glutaraldehyde (Molecular Formula: C5H8O2 or OCH(CH2)3CHO) is a colorless oily, liquid with a sharp pungent smell. Glutaral is used as a bactericide, disinfector, tanning agent. And it also widely used in petroleum development, leather treatment, food, plastics, coatings, etc. You can also see it in ingredient lists in some products. But you should know […]

How to choose a reliable THPS manufacturer is relly a big question.   THPS chemical is mainly used as a biocide. The main advantage of THPS biocide is its rapid degradation to completely harmless chemical after use. Therefore, it is widely used in water treatment, oil field, papermaking and other industries. It also can greatly […]